The list below shows which devices that was supported by Simulator at the time the list was generated. Additional support may be available through PackManager or Atmel Gallery.
Beware that the default fuse settings generally match the real device, which can cause surprises.
The ATmega128 mega103 compatibility fuse (M103C) is not programmed by default, and SUT is set to the shortest possible value in some devices
In most tinyAVR® devices, the SELFPRGEN fuse is unprogrammed by default, preventing SPM from working. Set this fuse when working with SPM.
Many tinyAVR devices have external reset as an alternative port function, and a RSTDISBL fuse to disable the external reset pin. When unprogrammed (the default setting), the corresponding port pin will not work as expected.
The CKDIV8 fuse is normally unprogrammed to increase simulation speed
Consult the device data sheet for info about fuses and their default settings.
Simulator models of SAM devices are not publicly distributed.
See Known Issues in Simulator for other known issues concerning the simulator.