| Bit15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
| CHANNEL[4:0] | |||||||
| Access | R/W | R/W | R/W | R/W | R/W | ||
| Reset | 0 | 0 | 0 | 0 | 0 | ||
| Bit7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| USER[4:0] | |||||||
| Access | R/W | R/W | R/W | R/W | R/W | ||
| Reset | 0 | 0 | 0 | 0 | 0 | ||
Channel Event Selection
These bits are used to select the channel to connect to the event user.
Note that to select channel n, the value (n+1) must be written to the USER.CHANNEL bit group.
| CHANNEL[4:0] | Channel Number |
|---|---|
| 0x0 | No Channel Output Selected |
| 0x1-0xC | Channel n-1 selected |
| 0xD-0xFF | Reserved |
User Multiplexer Selection
These bits select the event user to be configured with a channel, or the event user to read the channel value from.
| USER[7:0] | User Multiplexer | Description | Path Type |
|---|---|---|---|
| 0x00 | DMAC CH0 | Channel 0 | Resynchronized path only |
| 0x01 | DMAC CH1 | Channel 1 | Resynchronized path only |
| 0x02 | DMAC CH2 | Channel 2 | Resynchronized path only |
| 0x03 | DMAC CH3 | Channel 3 | Resynchronized path only |
| 0x04 | TCC0 EV0 | Asynchronous, synchronous and resynchronized paths | |
| 0x05 | TCC0 EV1 | Asynchronous, synchronous and resynchronized paths | |
| 0x06 | TCC0 MC0 | Match/Capture 0 | Asynchronous, synchronous and resynchronized paths |
| 0x07 | TCC0 MC1 | Match/Capture 1 | Asynchronous, synchronous and resynchronized paths |
| 0x08 | TCC0 MC2 | Match/Capture 2 | Asynchronous, synchronous and resynchronized paths |
| 0x09 | TCC0 MC3 | Match/Capture 3 | Asynchronous, synchronous and resynchronized paths |
| 0x0A | TCC1 EV0 | Asynchronous, synchronous and resynchronized paths | |
| 0x0B | TCC1 EV1 | Asynchronous, synchronous and resynchronized paths | |
| 0x0C | TCC1 MC0 | Match/Capture 0 | Asynchronous, synchronous and resynchronized paths |
| 0x0D | TCC1 MC1 | Match/Capture 1 | Asynchronous, synchronous and resynchronized paths |
| 0x0E | TCC2 EV0 | Asynchronous, synchronous and resynchronized paths | |
| 0x0F | TCC2 EV1 | Asynchronous, synchronous and resynchronized paths | |
| 0x10 | TCC2 MC0 | Match/Capture 0 | Asynchronous, synchronous and resynchronized paths |
| 0x11 | TCC2 MC1 | Match/Capture 1 | Asynchronous, synchronous and resynchronized paths |
| 0x12 | TC0 | Asynchronous, synchronous and resynchronized paths | |
| 0x13 | TC1 | Asynchronous, synchronous and resynchronized paths | |
| 0x14 | TC2 | Asynchronous, synchronous and resynchronized paths | |
| 0x15 | TC3 |
Asynchronous, synchronous and resynchronized paths |
|
| 0x16 | TC4 |
Asynchronous, synchronous and resynchronized paths |
|
| 0x17 | ADC START | ADC start conversion | Asynchronous path only |
| 0x18 | ADC SYNC | Flush ADC | Asynchronous path only |
| 0x19 | AC COMP0 | Start comparator 0 | Asynchronous path only |
| 0x1A | AC COMP1 | Start comparator 1 | Asynchronous path only |
| 0x1B | DAC START |
DAC start conversion |
Asynchronous path only |
| 0x1C | PTC STCONV |
PTC start conversion |
Asynchronous path only |
| 0x1D-0x1F | Reserved | Reserved |