Code

Add to the main application source file, before any functions:

#define CONF_PWM_MODULE      LED_0_PWM4CTRL_MODULE

#define CONF_PWM_CHANNEL     LED_0_PWM4CTRL_CHANNEL

#define CONF_PWM_OUTPUT      LED_0_PWM4CTRL_OUTPUT

#define CONF_PWM_OUT_PIN     LED_0_PWM4CTRL_PIN

#define CONF_PWM_OUT_MUX     LED_0_PWM4CTRL_MUX

Add to the main application source file, outside of any functions:

struct tcc_module tcc_instance;

Copy-paste the following setup code to your user application:

static void configure_tcc(void)
{
    struct tcc_config config_tcc;
    tcc_get_config_defaults(&config_tcc, CONF_PWM_MODULE);

    config_tcc.counter.clock_prescaler = TCC_CLOCK_PRESCALER_DIV256;
    config_tcc.counter.period = 0xFFFF;
    config_tcc.compare.wave_generation = TCC_WAVE_GENERATION_SINGLE_SLOPE_PWM;
    config_tcc.compare.match[CONF_PWM_CHANNEL] = (0xFFFF / 4);

    config_tcc.pins.enable_wave_out_pin[CONF_PWM_OUTPUT] = true;
    config_tcc.pins.wave_out_pin[CONF_PWM_OUTPUT]        = CONF_PWM_OUT_PIN;
    config_tcc.pins.wave_out_pin_mux[CONF_PWM_OUTPUT]    = CONF_PWM_OUT_MUX;

    tcc_init(&tcc_instance, CONF_PWM_MODULE, &config_tcc);

    tcc_enable(&tcc_instance);
}

Add to user application initialization (typically the start of main()):

configure_tcc();