Function extint_nmi_set

Writes an External Interrupt NMI channel configuration to the hardware module.

enum status_code extint_nmi_set_config(
		const uint8_t nmi_channel,
		const struct extint_nmi_conf *const config)

Writes out a given configuration of an External Interrupt NMI channel configuration to the hardware module. If the channel is already configured, the new configuration will replace the existing one.

Table 1. Parameters
Data direction	Parameter name	Description
[in]	nmi_channel	External Interrupt NMI channel to configure
[in]	config	Configuration settings for the channel

Returns

Status code indicating the success or failure of the request.

Table 2. Return Values
Return value	Description
STATUS_OK	Configuration succeeded
STATUS_ERR_PIN_MUX_INVALID	An invalid pinmux value was supplied
STATUS_ERR_BAD_FORMAT	An invalid detection mode was requested

Function extint_nmi_set_config()

Returns