Configure the DMA for Compare TCC Channel 0

Configure the DMAC module to update TCC channel 0 compare value. The flow is similar to last DMA configure step for capture.

Allocate and configure the DMA resource.

struct dma_resource compare_dma_resource;

struct dma_resource_config config;
dma_get_config_defaults(&config);
config.trigger_action = DMA_TRIGGER_ACTON_BEAT;
config.peripheral_trigger = CONF_COMPARE_TRIGGER;
dma_allocate(&compare_dma_resource, &config);

Prepare DMA transfer descriptor.

COMPILER_ALIGNED(16) DmacDescriptor compare_dma_descriptor;

struct dma_descriptor_config descriptor_config;

dma_descriptor_get_config_defaults(&descriptor_config);

descriptor_config.block_transfer_count = 3;
descriptor_config.beat_size = DMA_BEAT_SIZE_HWORD;
descriptor_config.dst_increment_enable = false;
descriptor_config.source_address =
        (uint32_t)compare_values + sizeof(compare_values);
descriptor_config.destination_address =
        (uint32_t)&CONF_PWM_MODULE->CC[CONF_PWM_CHANNEL];

dma_descriptor_create(&compare_dma_descriptor, &descriptor_config);

Start DMA transfer job with prepared descriptor.

dma_add_descriptor(&compare_dma_resource, &compare_dma_descriptor);
dma_add_descriptor(&compare_dma_resource, &compare_dma_descriptor);
dma_start_transfer_job(&compare_dma_resource);

4.
Enable the TCC module to start the timer and begin PWM signal generation.
```
tcc_enable(&tcc_instance);
```