Application Code End

Name:
APPEND
Offset:
0x07
Reset:
-
Access:
-
Bit76543210
APPEND[7:0]
AccessRRRRRRRR
Reset00000000

Bits 7:0 – APPEND[7:0]: Application Code Section End

Application Code Section End

These bits set the end of the application code section in blocks of 256 bytes. The end of the application code section should be set as BOOT size + application code size. The remaining Flash will be application data. A value of 0x00 defines the Flash from BOOTEND*256 to end of Flash as application code. When both FUSE.APPEND and FUSE.BOOTEND are 0x00, the entire Flash is BOOT section.