IOCEP

Interrupt-on-Change Positive Edge Register
Note:
  1. 1.If MCLRE = 1 or LVP = 1, RE3 port functionality is disabled and IOC on RE3 is not available.
Name:
IOCEP
Address:
0xF24
Reset:
Access:
Bit76543210
IOCEP3
AccessR/W
Reset0

Bit 3 – IOCEP3: Interrupt-on-Change Positive Edge Enable bit(1)

Interrupt-on-Change Positive Edge Enable bit(1)

ValueDescription
1 Interrupt-on-Change enabled on the IOCE pin for a positive-going edge. Associated Status bit and interrupt flag will be set upon detecting an edge.
0 Interrupt-on-Change disabled for the associated pin.