IRCOM Receiver Pulse Length Control Register

Name:
RXPLCTRL
Offset:
0x0E
Reset:
0x00
Access:
-
Bit76543210
RXPL[6:0]
AccessR/WR/WR/WR/WR/WR/WR/W
Reset0000000

Bits 6:0 – RXPL[6:0]: Receiver Pulse Length

Receiver Pulse Length

The 8-bit value sets the filter coefficient for the IRCOM transceiver. Setting this register will only have effect if IRCOM mode is selected by a USART.

By leaving this register value to zero, filtering is disabled. Setting this value between 0x01 and 0xFF will enable filtering, where x+1 equal samples are required for the pulse to be accepted.

RXPL must be configured before USART receiver is enabled (RXEN).