Usage

1.
Build the program and download it into the evaluation board.
2.
On the computer, open and configure a terminal application (e.g., HyperTerminal on Microsoft^® Windows^®) with these settings:
- 115200 baud
- 8 bits of data
- No parity
- 1 stop bit
- No flow control
3.
Start the application.

In the terminal window, the following text should appear:

*     -- DMAC Example --
*     -- xxxxxx-xx
*     -- Compiled: xxx xx xxxx xx:xx:xx --
*
*     Test single buffer transfer......
*     > Test OK
*
*     Test multiple buffer transfer......
*     > Test OK.

Note: Values depend on the board and the chip used.