I/O Ports

Table 1.
Standard Operating Conditions (unless otherwise stated)
Param. No.	Sym.	Device Characteristics	Min.	Typ.†	Max.	Units	Conditions
Input Low Voltage
	V_IL	I/O PORT:
D300		with TTL buffer	—	—	0.8	V	4.5V≤V_DD≤5.5V
D301		with TTL buffer	—	—	0.15 V_DD	V	1.8V≤V_DD≤4.5V
D302		with Schmitt Trigger buffer	—	—	0.2 V_DD	V	2.0V≤V_DD≤5.5V
D303		with I²C levels	—	—	0.3 V_DD	V
D304		with SMBus levels	—	—	0.8	V	2.7V≤V_DD≤5.5V
D305		MCLR	—	—	0.2 V_DD	V
High Low Voltage
	V_IH	I/O PORT:
D320		with TTL buffer	2.0	—	—	V	4.5V≤V_DD≤5.5V
D321		with TTL buffer	0.25 V_DD+0.8	—	—	V	1.8V≤V_DD≤4.5V
D322		with Schmitt Trigger buffer	0.8V_DD	—	—	V	2.0V≤V_DD≤5.5V
D323		with I²C levels	0.7 V_DD	—	—	V
D324		with SMBus levels	2.1	—	—	V	2.7V≤V_DD≤5.5V
D325		MCLR	0.7 V_DD	—	—	V
Input Leakage Current⁽¹⁾
D340	I_IL	I/O PORTS	—	±5	±125	nA	V_SS≤V_PIN≤V_DD, Pin at high-impedance, 85°C
D341		I/O PORTS	—	±5	±1000	nA	V_SS≤V_PIN≤V_DD, Pin at high-impedance, 125°C
D342		MCLR⁽²⁾	—	±50	±200	nA	V_SS≤V_PIN≤V_DD, Pin at high-impedance, 85°C
Weak Pull-up Current
D350	I_PUR		25	120	200	μA	V_DD=3.0V, V_PIN=V_SS
Output Low Voltage
D360	V_OL	I/O PORTS	—	—	0.6	V	I_OL=10.0 mA, V_DD=3.0V
Output High Voltage
D370	V_OH	I/O PORTS	V_DD-0.7	—	—	V	I_OH=6.0 mA, V_DD=3.0V
All I/O Pins
D380	C_IO		—	5	50	pF
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note: 1.Negative current is defined as current sourced by the pin. 2.The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages.