UxUIR
| Bit7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| WUIF | ABDIF | ABDIE | |||||
| AccessR/W/S | R/W/S | R/W | |||||
| Reset0 | 0 | 0 |
Wake-up Interrupt
| Value | Description |
|---|---|
| 1 | Idle to non-idle transition on RX line detected when WUE is set. Also sets UxIF. (WUIF must be cleared by software to clear UxIF) |
| 0 | WUE not enabled by software or no transition detected |
Auto-baud Detect Interrupt
| Value | Description |
|---|---|
| 1 | Auto-baud detection complete. Status shown in UxIF when ABDIE is set. (Must be cleared by software) |
| 0 | Auto-baud not enabled or auto-baud enabled and auto-baud detection not complete |
Auto-baud Detect Interrupt Enable
| Value | Description |
|---|---|
| 1 | ABDIF will set UxIF bit in PIRx register |
| 0 | ABDIF will not set UxIF |