CWGxAS1

CWGxAS1

CWG Auto-Shutdown Control Register 1

Note:

1.This bit may be written while EN = 0, to place the outputs into the shutdown configuration.
2.The outputs will remain in Auto-Shutdown state until the next rising edge of the CWG data input after this bit is cleared.

Name:: CWGxAS1
Address:: 0x3C3,0x3CC,0x3D5
Reset:
Access:

Bit7	6	5	4	3	2	1	0
AS7E	AS6E	AS5E	AS4E	AS3E	AS2E	AS1E	AS0E
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0

Bits 0, 1, 2, 3, 4, 5, 6, 7 – ASyE: CWG Auto-shutdown Source Enable(1,2)

CWG Auto-shutdown Source Enable^(1,2)

ASyE	Auto-Shutdown Source
ASyE	CWG1	CWG2	CWG3
AS7E	CLC6_OUT
AS6E	CLC2_OUT	CLC3_OUT	CLC4_OUT
AS5E	CMP2_OUT
AS4E	CMP1_OUT
AS3E	TMR6_Postscaler_OUT
AS2E	TMR4_Postscaler_OUT
AS1E	TMR2_Postscaler_OUT
AS0E	Pin selected by CWG1PPS	Pin selected by CWG2PPS	Pin selected by CWG3PPS