WPUx

Weak pull-up Register

Important:

The weak pull-up device is automatically disabled if the pin is configured as an output but this register remains unchanged.
If MCLRE = 1, the weak pull-up on MCLR pin is always enabled and the corresponding WPU bit is not affected.
Refer to the “Pin Allocation Table” for details about pin availability per port.

Bits 0, 1, 2, 3, 4, 5, 6, 7 – WPUxn: Weak Pull-up PORTx Control

Weak Pull-up PORTx Control

Value	Description
`1`	Weak pull-up enabled
`0`	Weak pull-up disabled