PINA

Port A Input Pins Address

When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an I/O address offset within 0x00 - 0x3F.

Name:: PINA
Offset:: 0x20
Reset:: N/A
Access:: When addressing as I/O Register: address offset is 0x00

Bit7	6	5	4	3	2	1	0
PINA7	PINA6	PINA5	PINA4	PINA3	PINA2	PINA1	PINA0
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset

Bits 0, 1, 2, 3, 4, 5, 6, 7 – PINA: Port A Input Pins Address

Port A Input Pins Address

Writing to the pin register provides toggle functionality for IO. Refer to Toggling the Pin.