OUTTGL

This register allows the user to toggle the drive level of one or more output I/O pins, without doing a read-modify-write operation. Changes in this register will also be reflected in the Data Output Value (OUT), Data Output Value Set (OUTSET) and Data Output Value Clear (OUTCLR) registers.

Bit31	30	29	28	27	26	25	24
OUTTGL[31:24]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit23	22	21	20	19	18	17	16
OUTTGL[23:16]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit15	14	13	12	11	10	9	8
OUTTGL[15:8]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit7	6	5	4	3	2	1	0
OUTTGL[7:0]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0

Bits 31:0 – OUTTGL[31:0]: PORT Data Output Value Toggle

PORT Data Output Value Toggle

Writing '0' to a bit has no effect.

Writing '1' to a bit will toggle the corresponding bit in the OUT register, which inverts the output drive level for I/O pins configured as outputs via the Data Direction register (DIR). For pins configured as inputs via Data Direction register (DIR) with pull enabled via the Pull Enable register (PULLEN), these bits will toggle the input pull direction.

Value	Description
0	The corresponding I/O pin in the PORT group will keep its configuration.
1	The corresponding OUT bit value is toggled.