CAL48M

OSC48M Calibration

This register (bits 0 to 21) must be updated with the corresponding data in the NVM Software Calibration Area: CAL48M 5V or CAL48M 3V3, depending on the VDD range. Refer to NVM Software Calibration Area Mapping.

Note: This register is only available for Rev D silicon.

Name:: CAL48M
Offset:: 0x38
Reset:: Calibrated value for VDD range 3.6 V to 5.5 V
Access:: PAC Write-Protection

Bit31	30	29	28	27	26	25	24

Access
Reset
Bit23	22	21	20	19	18	17	16
		TCAL[5:0]
Access		R/W	R/W	R/W	R/W	R/W	R/W
Reset		x	x	x	x	x	x
Bit15	14	13	12	11	10	9	8
						FRANGE[1:0]
Access						R/W	R/W
Reset						x	x
Bit7	6	5	4	3	2	1	0
		FCAL[5:0]
Access		R/W	R/W	R/W	R/W	R/W	R/W
Reset		x	x	x	x	x	x

Bits 21:16 – TCAL[5:0]: Temperature Calibration

Temperature Calibration

Bits 9:8 – FRANGE[1:0]: Frequency Range

Frequency Range

Bits 5:0 – FCAL[5:0]: Frequency Calibration

Frequency Calibration