USB enumeration
- 1.
Connect one of the board assemblies to you PC and let it start USB enumeration
process.
- 2.
The first time this is done, the CDC driver will have to be installed. A "Found new
hardware wizard" will pop up. Select "No, not this time" and next.
- 3.
Select "Install from a list or specific location (Advanced)". Click next. Select
"Include this location in the search:". Select the following folder:
/PAL/AVR32/UC3A3256/Boards.
- 4.
Click "Finish".
- 5.
Verify what COM port that was assigned to the USB device. This can be done from the
Control Panel under the start menu. Select Administrative Tools from the menu and
then click the Computer Management. Now click on the Computer Management item - and
look under the "Ports (COM and LPT)" from the list. A new COM port should be
available
- 6.
Repeat 1 to 5 for the second board assembly.