This step is only required for doing application development on the RZ600 kit.
- 1.
Connect either a JTAG ICE mkII or AVRONE! to your compter.
- 2.
Go through the driver installation. Let the PC select the best USB driver for the attached debugger. The AVR USB program takes care of this in the background.
- 3.
Solder the 50 mil 10-pin connector to one of the processor board.
- 4.
Mount a 100mil to 50mil adapter to the debugger and connect the probe to the freshly soldered connector.
- 5.
Use AVR32 Studio or IAR Embedded Workbench to develop and debug programs.