The table below can be used to calculate the additional current consumption for the different I/O peripherals in the various operating modes.
| Peripheral | Conditions | Typ.(1) | Unit |
|---|---|---|---|
| BOD | Continuous | 19 | µA |
| Sampling @ 1kHz | 1.2 | ||
| TCA | 16bit count @ 1MHz | 12.6 | µA |
| TCB | 16bit count @ 1MHz | 7.4 | µA |
| RTC | 16bit count @ OSCULP32K | 1.2 | µA |
| WDT (including OSCULP32K) | 0.7 | µA | |
| OSC20M | 125 | µA | |
| AC | Fast Mode(2) | 92 | µA |
| Low Power Mode(2) | 45 | µA | |
| ADC | 50ksps | 325 | µA |
| 100ksps | 340 | µA | |
| XOSC32K | CL=7.5pF | 0.5 | µA |
| OSCULP32K | 0.4 | µA | |
| USART | Enable @ 9600 Baud | 13 | µA |
| SPI (Master) | Enable @ 100kHz | 2.1 | µA |
| TWI (Master) | Enable @ 100kHz | 23.9 | µA |
| TWI (Slave) | Enable @ 100kHz | 17.1 | µA |
| Flash programming | Erase Operation | 1.5 | mA |
| Write Operation | 3.0 | ||