Atmel Studio 7.0

Atmel Studio 7.0.2397

Updated nEDGB firmware (v1.14.464) fixing a connection issue

Atmel Studio 7.0.2389

Atmel Studio 7.0.2389 contains:

Advanced Software Framework 3.47.0
AVR 8-bit GCC Toolchain 3.6.2
Arm GCC Toolchain 6.3.1 with Upstream Versions: gcc (Arm/embedded-6-branch revision 249437), GNU Arm Embedded Toolchain: 6-2017-q2-update
Inclusion of the Most Recent Device Family Packs Included in Installer as of Sept. 2019. Use the Device Pack Manager to Check for Updates to get the Newest Device Support, or to Download an Older Device Family Pack for Legacy Support.
Contains Fixes for the Following Issues:
- AVRSV-8221: Issue with SRAM access seen for ATtiny817 with EDBG
- AVRSV-8212: Reading Target voltage for SAMD21 fails
- AVRSV-8187: Support for CMSIS 5.4.0 schema in atpackmanager
- AVRSV-8170: SAM D51, E5x - ELF parsing incorrect with ECC in flash
- AVRSV-8105: Erase User page before programming fails for SAME54
- AVRSV-8073: SAM E54 User Page read/write using atprogram
- AVRSV-8130: Studio picks up old JLinkArm.dll instead of the installed one
- AVRSV-8166: tinyAVR^®-2 devices are not compiling due to incorrect memory definition in linker script
- AVRSV-8176: EEPROM and User Signature erase broken on UPDI
- AVRSV-8158: Unable to build ASM-projects for AVR64DA128 in Studio
- AVRSV-8123: Reading voltage doesn't work when device ID does not match
- AVRSV-8152: Update lib-elf-dwarf build job from stash to bitbucket
- AVRSV-8132: ChipErase issue with Jlink
- AVRSV-8131: SAMD21J17D is unable to Program or Debug with Atmel-ICE
- AVRSV-8171: SAM L11 BOOTOPT programming issue
- AVRSV-8159: Not able to program BOCOR on SAML11 from within an ELF file
- AVRSV-8149: Breakpoints support for TrustZone^® SG assembly instruction
- AVRSV-8182: Issue with Secure Boot support for SAM L11

Atmel Studio 7.0.1931

Atmel Studio 7.0.1931 contains:

Advanced Software Framework 3.40.0
New Microchip Gallery extension
Atmel START Extension Provides Improved Feedback on Required Device Pack Dependencies
Support for Arm^® Cortex^®-M23 Architecture with TrustZone^®
Support for Kits with the New nEDBG Debugger Platform
Support for Devices:
- ATSAMHA1E[14|15|16]AB
- ATSAML10[D|E][14|15|16]A
- ATSAML11[D|E][14|15|16]A
- ATtiny202, ATtiny204, ATtiny402, ATtiny404, ATtiny406, ATtiny804, ATtiny806, ATtiny807, ATtiny1604, ATtiny1606, ATtiny1607
AVR 8-bit GCC Toolchain 3.6.1
Arm GCC Toolchain 6.3.1 with Upstream Versions: gcc (Arm/embedded-6-branch revision 249437), GNU Arm Embedded Toolchain: 6-2017-q2-update
Atmel Studio 7.0.1931 Contains Fixes for the Following Issues that were Present in 7.0.1645:
- AVRSV-8001: Tool firmware upgrade instability.
- AVRSV-8063: ELF production file programming did not support fuses for ATtiny817 family.
- AVRSV-8075: Launch of debugging with ATSAM4L unstable in some cases.
- AVRSV-7895: Solution with links between projects compiles wrong file.
- AVRSV-7745: Linked files in subfolder causes build failure.
- AVRSV-7939: Function breakpoint fails for AVR devices.
- AVRSV-8005: Writing fuses and memory fails in some cases on M0+ devices.

Atmel Studio 7.0.1645

Atmel Studio 7.0.1645 contains:

Advanced Software Framework 3.35.1.898
Support for Devices:
- ATmega4808, ATmega4809
- ATtiny1614, ATtiny3214, ATtiny3216, ATtiny3217
- ATSAMC[20|21][J|N][15|17|18]A
- ATSAMD20[E|G|J][14|15|16]B
- ATSAMD51[G|J|N|P][18|19|20]A
- ATSAME[51|53|54][J|N][18|19|20]
- ATSAME70[N|Q][19|20|21]B
- ATSAMS70[J|N|Q][19|20|21]B
AVR 8-bit GCC Toolchain 3.6.1
Arm GCC Toolchain 6.3.1 with Upstream Versions: gcc (Arm/embedded-6-branch revision 249437), GNU Arm Embedded Toolchain: 6-2017-q2-update
Atmel Studio 7.0.1645 Contains Fixes for the Following Issues that were Present in 7.0.1417:
- AVRSV-7798: ATtiny817 fuse programming from ELF issue fixed.
- AVRSV-7742: Compiling an imported Arduino sketch for Arduino zero shows error.
- AVRSV-7903: Studio automatically sets GPNVM bits [7:8] thereby enabling TCM.
- AVRSV-7892: Writing SAML22 RWW flash fails.
- AVRSV-7889: Skewed debug info for AVR 8-bit in AS 7.0.1417.
- AVRSV-7883: Incorrect warning message for KB2978092 during installation of AS 7.0.1417.
- AVRSV-7106: Hex parser fails on UNIX^® line endings.
- AVRSV-4914: Add support for new avr-gcc __int24 and __uint24 types.
- AVRSV-7877: Devices with external SRAM fails to calculate available SRAM.
- AVRSV-7845: Crash in _ReallyTerminateAfterLaunchFinished.
- AVRSV-7834: Pack manager fails to download CMSIS DFPs.
- AVRSV-7876: Add checksum fields to http header for KitsDatabase.xml.
- AVRSV-7854: NaN values not handled by atprogram.
- AVRSV-7911: Problems reading device ID on ATmega4809.
- AVRSV-7202: Arduino Library Grouping can have better representation.
- AVRSV-7927: Security Bit Window in Device Programming should not always be available depending on the MCUs.
- AVRSV-7973: Chip erase outside prog session fails on SAM4L.
- AVRSV-7961: FUSE configuration warning for BOD( BODCFG.LVL) is incorrect in Atmel Studio.

Note: QTouch^® Composer extension must be updated to version 5.9.122 or later to work with Atmel Studio 7.0.1645.

Atmel Studio 7.0.1417

Atmel Studio 7.0.1417 contains a fix for the following issue that was present in 7.0.1416:

AVRSV-7827: New WinUSB driver fails to install on 32-bit Windows^®

Atmel Studio 7.0.1416

The following changes are done in Atmel Studio 7.0.1416:

Changed Driver to WinUSB for AVR Dragon, AVRISP mkII, JTAGICE mkII, JTAGICE3, AVR ONE!, STK600, and QT600
Installer Improvements
Improved Support for Installing Older Device Family Packs
AVR 8-bit GCC Toolchain 3.6.0 with Upstream Versions:
- gcc 5.4.0
- Binutils 2.26.20160125
- avr-libc 2.0.0
- gdb 7.8
Arm GCC Toolchain 6.2.1 with Upstream Versions:
- gcc (Arm/embedded-6-branch revision 243739), GNU Arm Embedded Toolchain: 6-2016-q4-major
- Binutils 2.27
- gdb 7.12
Advanced Software Framework 3.34.1

Atmel Studio 7.0.1416 contains a fix for the following issues that were present in 7.0.1188:

AVRSV-7492: Illegal PC value after a few resume-suspend cycles on SAMD10.
AVRSV-7486: Debugging may fail in Cortex^®-M0+ SAM devices at high clock.
AVRSV-7693: Go to source from Watch window crashes studio.
AVRSV-7741: Writing Flash or EEPROM with size of 0x100 or 0x1000 fails on ISP/SPI programming.

Atmel Studio 7.0.1188

The following changes are done in Atmel Studio 7.0.1188:

Added Support for New AVR8X Architecture
Installer Improvements
Improved Arduino Import
Change How Fuses are Listed in the Programming Dialog
AVR 8-bit GCC Toolchain 3.5.4 with Upstream Versions:
- gcc 4.9.2
- Binutils 2.26
- avr-libc 2.0.0
- gdb 7.8

Atmel Studio 7.0.1188 Contains a Fix for the Following Issues that were Present in 7.0.1006:

AVRSV-7149: When writing EEPROM, bytes that are 0xFF are wrongly skipped.
AVRSV-7393: Atmel Studio backend crashes when debugging a COFF object file.
AVRSV-7564: Atmel Studio installation is hanging.
AVRSV-7580: Atmel Studio not handling DCACHE properly on SAM Cortex^®-M7 devices.
AVRSV-7582: Remove white spaces while saving file does not show the anticipated effect.
AVRSV-7594: Atmel Studio crashes in some cases when you stop debugging.
AVRSV-7602: Cannot find bounds of the current function.
AVRSV-7607: Invalid MTB buffer start address for SAML2x and SAMC2x devices.

Atmel Studio 7.0.1006

The following changes are done in Atmel Studio 7.0.1006:

New Atmel START Extension That Allows the User to Create and Configure Atmel START Projects within Atmel Studio
Ability to Load Multiple Modules in a Debug Session (experimental)
AVR 8-bit GCC Toolchain 3.5.3 with Upstream Versions:
- gcc 4.9.2
- Binutils 2.26
- avr-libc 2.0.0
- gdb 7.8
Arm GCC Toolchain 5.3.1 with Upstream Versions:
- gcc (Arm/embedded-5-branch revision 234589)
- Binutils 2.26
- gdb 7.10

Atmel Studio 7.0.1006 Contains a Fix for the Following Issues that were Present in 7.0.943:

AVRSV-6878: Atmel Studio write the write-once wdt registers on some SAM devices.
AVRSV-7470: SAM Cortex^®-M7 devices fails launch occasionally.
AVRSV-7471: Devices with external and internal RAM lists all the RAM as available.
AVRSV-7473: Atmel Studio hangs during start-up.
AVRSV-7474: Kits connected to Atmel Studio are not getting enumerated in the QTouch Start Page.
AVRSV-7477: Show all files does not work from solution explorer.
AVRSV-7482: Exception when adding a breakpoint on SAM4L.
AVRSV-7486: Debugging may fail in Cortex^®-M0+ SAM devices at high clock speeds.

Atmel Studio 7.0.943

Atmel Studio 7.0.943 contains a fix for the following issue:

AVRSV-7459: Projects containing files with uppercase file names can fail to build. Saving files with uppercase file names convert file names to lower case.

Atmel Studio 7.0.934

The following changes are done in Atmel Studio 7.0.934:

AVR 8-bit GCC Toolchain 3.5.2 with Upstream Versions:
- gcc 4.9.2
- Binutils 2.26
- avr-libc 2.0.0
- gdb 7.8
AVR 32-bit GCC Toolchain 3.4.3 with Upstream Versions:
- gcc 4.4.7
- Binutils 2.23.1
- Newlib 1.16.0
Arm GCC Toolchain 4.9.3 with Upstream Versions:
- gcc (Arm/embedded-4_9-branch revision 224288)
- Binutils 2.24
- gdb 7.8.0.20150304-cvs

Atmel Studio 7.0.934 resolves the following issues present in Atmel Studio 7.0.790:

AVRSV-7376: Atmel-ICE slow programming.
AVRSV-7379: Unhandled exception when writing fuses or lock bits when Auto Read is turned off.
AVRSV-7396: Some machines shows an error regarding 'Exception in MemoryPressureReliever'.
AVRSV-7400: When in Standard mode, Disable debugWIRE and Close are not visible in the Debug menu.
AVRSV-7408: When using Atmel Studio in Standard mode, the Set Startup Project menu is missing.

Atmel Studio 7.0.790

The following features are added in Atmel Studio 7.0.790:

Support for Mass Storage Mode in Embedded Debugger (EDBG), Enabling Drag and Drop Programming
Introduction of User Interface Profiles. The User can Choose an Interface Where Some of the Toolbar Buttons and Menu Items are Removed.
Support for Importing Libraries to Previously Imported Sketches. Added support for Arduino Zero and Zero Pro.
Parallel Build Turned on by Default

Atmel Studio 7.0.790 resolves the following issues present in Atmel Studio 7.0.634:

AVRSV-7084: Persist user settings during the upgrade.
AVRSV-7014: Some ATmega and ATtiny devices failed to start debugging with the Simulator.
AVRSV-7230: 'Show all files' in Solution Explorer not consistent.
AVRSV-7062: Firmware upgrade of Xplained Mini kits not detected.
AVRSV-7164: Reading flash to .bin file created incorrect .bin file.
AVRSV-7106: Hex files with UNIX or mixed file endings fail to load.
AVRSV-7126: Data breakpoints for Arm should not be limited to RAM.

Atmel Studio 7.0.634

This release adds device support for the SAM B11 device family.

Atmel Studio 7.0.634 resolves the following issues present in Atmel Studio 7.0.594:

AVRSV-6873: Jungo Driver issue with Windows 10.
AVRSV-6676: Launching debugging fails due to an issue with Intel graphics driver.

Atmel Studio 7.0.594

Atmel Studio 7.0.594 resolves the following issues present in Atmel Studio 7.0.582:

AVRSV-7008: Opening a 6.2 project in Atmel Studio 7.0.582 persists Debug configuration settings for all the other configurations.
AVRSV-6983: Uninstalling Studio extensions does not work in some cases.
AVRSV-7018: Project Creation fails with some culture-specific user-names.
AVRSV-7019: Help Viewer does not work on 32-bit machines.
Issues with getting tools/debuggers recognized or visible see section 2.4 in ‘Atmel Studio 7.0.594-readme.pdf’ for workarounds.

Atmel Studio 7.0.582

Updated to Visual Studio Isolated Shell 2015
Integration with Atmel START
- This tool will help you select and configure software components, drivers, middle-ware, and example projects to tailor your embedded application in a usable and optimized manner
New Device Support System, CMSIS Pack Compliant
Data Visualizer, Used for Processing and Visualizing Data
Updated Help System, Improved Context-Sensitive Help
Advanced Software Framework Version 3.27.3. ASF is an Extensive Software Library of Software Stacks and Examples.
A Major Upgrade of the Visual Assist Extension to Atmel Studio that Assists with Reading, Writing, Re-Factoring, Navigating Code Fast
Import Arduino Sketch Projects Into Atmel Studio
Support for Flip-Compatible Bootloaders in atprogram and Programming Dialogue. The Connected Device Appears as a Tool.
AVR 8-bit GCC Toolchain 3.5.0 with Upstream Versions^¹:
- gcc 4.9.2
- Binutils 2.25
- avr-libc 1.8.0svn
- gdb 7.8
AVR 32-bit GCC Toolchain 3.4.3 with Upstream Versions^¹:
- gcc 4.4.7
- Binutils 2.23.1
- Newlib 1.16.0
Arm GCC Toolchain 4.9.3 with Upstream Versions^¹:
- gcc 4.9 (revision 221220)
- Binutils 2.24
- gdb 7.8.0.20150304-cvs