PINC

Port C Input Pins Address

When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an I/O address offset within 0x00 - 0x3F.

Name:: PINC
Offset:: 0x26
Reset:: N/A
Access:: When addressing as I/O Register: address offset is 0x06

Bit7	6	5	4	3	2	1	0
	PINC6	PINC5	PINC4	PINC3	PINC2	PINC1	PINC0
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	x	x	x	x	x	x	x

Bits 6:0 – PINCn: Port C Input Pins Address [n = 6:0]

Port C Input Pins Address [n = 6:0]

Writing to the pin register provides toggle functionality for IO. Refer to Toggling the Pin.