PIND

Port D Input Pins Address

When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an I/O address offset within 0x00 - 0x3F.

Name:: PIND
Offset:: 0x29
Reset:: N/A
Access:: When addressing as I/O Register: address offset is 0x09

Bit7	6	5	4	3	2	1	0
PIND7	PIND6	PIND5	PIND4	PIND3	PIND2	PIND1	PIND0
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Resetx	x	x	x	x	x	x	x

Bits 7:0 – PINDn: Port D Input Pins Address [n = 7:0]

Port D Input Pins Address [n = 7:0]

Writing to the pin register provides toggle functionality for IO. Refer to Toggling the Pin.