- AVR® Studio 4/AVR32 Studio/AVR Studio 5/Atmel Studio
Compatible
- USB Interface to PC for
Programming and Control
- Powered from the USB Bus or an
External 10-15V DC Power Supply
- Adjustable Target
VCC (0-5.5V)
- Two Adjustable Reference
Voltages with High Accuracy (0-5.0V, 10 mV res.)
- Clock Oscillator, Adjustable
On-The-Fly from Atmel Studio (0-50 MHz, 0.1% res.)
- Serial In-System Programming
(ISP) of tinyAVR and megaAVR® Devices
- PDI Programming of AVR XMEGA® Devices
- JTAG Programming of megaAVR,
AVR XMEGA, and AVR UC3 Devices
- aWire Programming of AVR UC3
Devices
- ISP and JTAG Programming of AVR
Devices in External Target Systems
- Flexible Routing and Socket
Card System for Easy Mounting of all Supported Devices
- Eight Push Buttons for General
Use
- Eight LEDs for General Use
- All AVR I/O Ports are Easily
Accessible through Pin Header Connectors
- Expansion Connectors for
Plug-In Modules and Prototyping Area
- On-Board 4 Mb DataFlash for
Nonvolatile Data
- USB mini-AB (On-The-Go)
Connector for AVR Devices with USB
- PHY and DSUB-9 Connector for
RS-232 Interface
- PHY and DSUB-9 Connector for
CAN Bus
- PHY and Header for LIN Bus
- Device Board with an ATmega2560
AVR Microcontroller Included
Note: Socket cards and routing cards must be
bought separately.