Overview

Table 1. Port Availability per Device
Device	PORTA	PORTB	PORTC	PORTD	PORTE	PORTF
28-pin devices	●	●	●		●⁽¹⁾
40/44-pin devices	●	●	●	●	●⁽²⁾
48-pin devices	●	●	●	●	●⁽²⁾	●
Note: 1.Pin RE3 only 2.Pins RE0, RE1, RE2 and RE3 only

Each port has eight registers to control the operation. These registers are:

PORTx registers (reads the levels on the pins of the device)
LATx registers (output latch)
TRISx registers (data direction)
ANSELx registers (analog select)
WPUx registers (weak pull-up)
INLVLx (input level control)
SLRCONx registers (slew rate control)
ODCONx registers (open-drain control)

In this chapter the generic names such as PORTx, LATx, TRISx, etc. can be associated with PORTA, PORTB, PORTC, etc., depending on availability per device.

A simplified model of a generic I/O port, without the interfaces to other peripherals, is shown in the following figure:

Figure 1. Generic I/O Port Operation