Initialization

The generic clocks (GCLK_TSENS) should be configured and enabled. Refer to the Generic Clock Controller chapter for details.

The following bits are enable-protected, meaning that they can only be written when the TSENS is disabled (CTRLA.ENABLE is zero):

• Run in Standby bit in Control A register (CTRLA.RUNSTDBY)

The following registers are enable-protected:

• Control C (CTRLC)
• Event Control (EVCTRL)
• Window Monitor Lower Threhold (WINLT)
• Window Monitor Upper Threshold (WINUT)
• Gain Correction (GAIN)
• Offset Correction (OFFSET)
• Calibration (CAL)

Enable-protection is denoted by the Enable-Protected property in the register description.