Completion of a Conversion

When any individual conversion is complete, the existing value in ADRES is written into ADPREV (if PSIS = 0) and the new conversion results appear in ADRES. When the conversion completes, the ADC module will:

• Clear the GO bit (unless the CONT bit is set)
• Set the ADIF Interrupt Flag bit
• Set the MATH bit
• Update ADACC

After every conversion when DSEN = 0, or after every other conversion when DSEN = 1, the following events occur:

• ADERR is calculated
• ADTIF interrupt is set if ADERR calculation meets threshold comparison