I2CxPIE

I2C Interrupt and Hold Enable Register
Note:
  1. 1.Enabled interrupt flags are OR’ed to produce the PIRx[I2CxIF] bit.
  2. 2.When ACKTIE is set (ACKTIE = 1) and ACKTIF becomes set (ACKTIF = 1), if an ACK is generated, CSTR is also set. If a NACK is generated, CSTR remains unchanged.
  3. 3.When WRIE is set (WRIE = 1) and WRIF becomes set (WRIF = 1), CSTR is also set.
  4. 4.When ADRIE is set (ADRIE = 1) and ADRIF becomes set (ADRIF = 1), CSTR is also set.
Name:
I2CxPIE
Address:
0x029B
Reset:
Access:
Bit76543210
CNTIEACKTIEWRIEADRIEPCIERSCIESCIE
AccessR/WR/WR/WR/WR/WR/WR/W
Reset0000000

Bit 7 – CNTIE: Byte Count Interrupt Enable(1)

Byte Count Interrupt Enable(1)

ValueDescription
1 Enables Byte Count interrupts
0 Disables Byte Count interrupts

Bit 6 – ACKTIE: Acknowledge Status Time Interrupt and Hold Enable(1,2)

Acknowledge Status Time Interrupt and Hold Enable(1,2)

ValueDescription
1 Enables Acknowledge Status Time Interrupt and Hold condition
0 Disables Acknowledge Status Time Interrupt and Hold condition

Bit 4 – WRIE: Data Write Interrupt and Hold Enable(1,3)

Data Write Interrupt and Hold Enable(1,3)

ValueDescription
1 Enables Data Write Interrupt and Hold condition
0 Disables Data Write Interrupt and Hold condition

Bit 3 – ADRIE: Address Interrupt and Hold Enable(1,4)

Address Interrupt and Hold Enable(1,4)

ValueDescription
1 Enables Address Interrupt and Hold condition
0 Disables Address Interrupt and Hold condition

Bit 2 – PCIE: Stop Condition Interrupt Enable(1)

Stop Condition Interrupt Enable(1)

ValueDescription
1 Enables interrupt on the detection of a Stop condition
0 Disables interrupt on the detection of a Stop condition

Bit 1 – RSCIE: Restart Condition Interrupt Enable(1)

Restart Condition Interrupt Enable(1)

ValueDescription
1 Enables interrupt on the detection of a Restart condition
0 Disables interrupt on the detection of a Restart condition

Bit 0 – SCIE: Stop Condition Interrupt Enable(1)

Stop Condition Interrupt Enable(1)

ValueDescription
1 Enables interrupt on the detection of a Start condition
0 Disables interrupt on the detection of a Start condition